Marine Care QLD
15 Daintree Drive, Redland Bay
(Redlands Business Park)

At Marine Care Qld, we provide your one stop boating shop
Located at Redland Bay, we are the authorised Evinrude, Honda, Anglapro & Bonito dealer in the Redlands.
We offer full repair, maintenance and servicing on all major brand outboards and sterndrives
Evinrude & Honda warranty repairs
Suppliers and stockists of Dunbier, Mackay and Seatrail boat trailers
Repower specialists
Boating advice & the best deals around!
Our operating hours: Monday to Friday 8:00am to 4:00pm



New Anglapro Sniper 484 Pro package with 60hp Honda!

Steve and Leanne picked up their new Anglapro Sniper 484 Pro Package which included an aluminium trailer from Dunbier, a 60hp Honda motor and plenty of optional extras.

The highly refined skills of a Sniper means they can not only hit their target with precise accuracy but apply their skills in any environment. That’s how we designed our deep V side console. It’s the ultimate cross over. Stable and capable in enclosed waters and tough and comfortable in the rough stuff.
 
The Sniper is fully equipped to target fish, anywhere. 3mm bottom and sides with aggressive ribbing support means you can have total confidence in your hull strength. A Deep V dead rise means you don’t have to slow down in the chop. The interior features the decking, storage, tanks and electronics you need to enjoy fuss free fishing. The Sniper package will give you the confidence to step your fishing up to the next level.
 
The Sniper is a masterpiece to behold with the design features all working to together to produce a fishing platform that lacks nothing. There is a hidden ingredient as well called the X factor. Hidden deep within the pedigree of this vessel, the Sniper slaps a smile on your dial which only comes from driving a boat that thrills you. It’s an Aluminium fishing boat that performs like a sports boat.


Evinrude Repower!

Take a look at these recent Evinrude E-Tec repowers!

This is just a sample of what Marine Care Qld can do for you. Get your boat on the water with an Evinrude repower.

All Evinrude E-tec engines meet or exceed all government emission standards. All E-Tec Engines over 30hp come standard with a Stainless Steel prop.

Ask us today about repowering!


Anglapro Sniper 544

**DISPLAY STOCK SPECIAL**

$42,990.00

This Sniper 554 Elite is one serious fishing outfit, but with plenty of comfort to suit the whole family. This package comes complete with Evinrude Etec 130hp outboard and Dunbier dual axel trailer. All built and ready for action!

The Sniper is fully equipped to target fish anywhere. 3mm bottom and sides with aggressive ribbing support means you can have total confidence in your hull strength. A Deep V dead rise means you dont have to slow down in the chop. The interior features the decking, storage, tanks and electronics you need to enjoy fuss free fishing. The Sniper package will give you the confidence to step your fishing up to the next level.

The features on this boat are extensive and the quality of the fit out is second to none. An inspection will surely impress!


Carl picked up his new 50hp Evinrude repower today and cannot wait to get out on the water!
Got your eye on an Evinrude motor or looking for more information? Give us a call today on 07 3186 5270 or email enquiries@marinecareqld.com



In Stock Now!!!

24,990.00

$43,990.00

$53,990.00

$8,495.00


150hp Honda Repower

We recently installed a new 150hp Honda to a commercial crabbing boat that does approximately 2000 hrs a year. To date, the Honda is delivering a solid performance with great fuel efficiency.

The BF150 features Variable Valve Timing and Lift Electronic Control (VTEC™) initially developed for Honda’s high-performance sportscars.

Introduced in the early 1990s, VTEC™ is the benchmark technology used on every Honda motor vehicle sold today.

The system ensures smooth, stable idling with an even further reduction in fuel consumption, while the increased valve lift at high revs broadens the torque curve and provides incredible top-end power.

Along with Honda’s Programmed Fuel Injection, the BF150 incorporates Lean Burn Control technology, which allows combustion to operate on a leaner air/fuel ratio than stoichiometric air/fuel.

An O2 sensor, together with the ECM, precisely controls the air/fuel mixture for the best fuel economy at cruise settings. The mode in which lean burn control is used during cruising to achieve higher fuel economy is referred to as ECOmo (Economy Controlled Motor).

Pair this with the BF150’s Multi-Port Programmed Fuel Injection (PGM-FI) that delivers the precise amount of air/fuel to each cylinder, and what do you get? Quick starts, instant throttle response and low fuel consumption.

Matts Evinrude Repower

Matt recently repowered his boat with a new 140hp Evinrude E-tec 3 cylinder G2 motor. The results speak for themselves – it not only looks good, but performs like a dream!

Marine Care Qld sells the entire range of Evinrude Etec Outboards. From small portables right through to the new release and ground breaking G2 range. Our fully certified outboard engine technicians can install and pre deliver your brand new Etec engine for complete peace of mind. All fit ups are fully guaranteed and of the highest standard.




E-Tec 115HO HP Performance and Testimonial

We recently fitted one of the new Evinrude E-Tec 3 Cylinder G2 115HO HP outboards to a commercial boat that does up to 2000 hrs per year. See how it performs on the water and hear the testimonial from boat owner, Gary about his experience with his new motor.



New G2 3cyl 140hp DPS Evinrude E-TEC Outboards are Here!

The new Evinrude E-TEC G2 3 cylinder 140hp DPS outboards are here and Marine Care Qld currently have 2 in stock – THE FIRST IN THE COUNTRY!!!

Shattering the paradigm for mid-range outboards, the new models house a direct injection inline three-cylinder powerhead. Delivering refined running quality, and quiet operation, the E-TEC 3 cylinder G2 range of outboards enhance the complete boating experience. With more torque and fuel efficiency at lower RPMs than comparable four-stroke engines, the new E-TEC G2 models give boaters extended cruising capabilities and more power whenever it’s needed.

Be the first in AUSTRALIA to own one of these revolutionary outboard engines! Contact us today:
(07) 3186 5270 or email:
enquiries@marinecareqld.com


previous arrow
next arrow
Slider

Marine Care Qld spent an amazing weekend at the very first Horizon Shores Boat Show. Boats, shows, demos, activities, great food and a live boat auction – this show promises to get better and better every year! We had the opportunity to meet so many people and can’t wait to catch up with you at the next one! Feel free to share any photos you took at the Marine Care Qld booth on our Facebook page!


Looking for finance to get into your new boat quicker? Or how about repowering your current craft?

Marine Care Qld can show you how to get started!


Anglapro Boats Are Here!

The guys from Anglapro Boats have delivered stock and the first arrival was this very neat Chaser 454 CLX! It’s ready to be fitted with your choice of Evinrude or Honda motor up to 60HP and is complete with Dunbier Sports trailer.

Anglapro build boats that suit Australian conditions, meaning they are built tough. This is something that they pride themselves on, giving the end user a safe and great riding craft.

Anglapro provides you with a huge 5-year structural warranty on their 3mm and above constructed  boats. This gives you the peace of mind for all of those years on the water.

Marine Care Qld can also offer you at some great finance and insurance options, thanks to our partners at Ausloans Finance Group and Club Marine.

Contact Us now and see how you can be on the water in your new boat much sooner than you think!

Marine Care Qld now stocks Honda Marine!

We stock Honda 4-stroke outboards and parts to complement our current Evinrude range. You can come to us for all your Honda Marine engines, servicing and parts too!

The Honda Marine engine range is well known for reliability, being easy to use, easy to service and excellent value. We welcome the silver engines to Marine Care Qld and can’t wait to help you with a quote! Contact us now to find out more!

It’s the Season for Servicing!

The guys here are hard at work servicing all makes and models of outboards here at Marine Care Qld.

As you see in these pics, we’re right into our Evinrudes and Hondas here at MCQ.

When was your engine last checked over?

Why not give us a call today on (07) 3186 5270 or send a message to find out how we can keep your outboard singing like a bird!